Coming soon.
Rudder pedal controller using USB (part number 204-TV-B). This board will interface your home made DIY Rudder Pedals to Flight Simulator using USB. It’s inputs will be 3 x 10k ohm pots, one for the rudder and one each for the left and right toe brakes which connect with provided Molex connectors. USB is via a B type connector which also provides the required power for the interface board.
The prototype board is about 52mm (2inch) x 35mm (1.4inch) x aprox 20mm (0.8inch) high with the Rudder/Toe brake connectors connected. It will be available pre-built and tested with or without pots. It uses the standard Human Interface Device (HID) USB specifications for a Rudder Pedal Control meaning it should work on any operating system using this specification (Windows, Linux and MAC).
Prototype USB Rudder Pedal Controller