Aerobatics with a remote control jet

Some of the things possible with these jet powered remote contol planes is incredible. This one, specially built for aerobatics has a variable nozel on the engine allowing it to be pointed in different directions and the small wings at the front of the plane are used to control where the front points and to make the plane do it’s unique wheel stands down the runway at low speed.
Have a look at the video at the 2007 Jet Action at the Adelaide Model Aerosport field in Monarto about 45 minutes east of Adelaide, South Australia.

Posted in Model aircraft, YouTube finds | Tagged , , , , | Comments Off on Aerobatics with a remote control jet

Fighter jet crashes into trees at Monarto, South Australia

Saturday, 26th May 2007 Monarto, South Australia.

A F-18 Hornet fighter jet suffers engine failure just near the Monarto Zoo about 45 minutes east of Adelaide in South Australia. The pilot desperately tried to get the plane down safely however with to much speed found the plane crashing into trees. Astonished onlookers could do nothing. The action was captured on video and posted to the popular YouTube site.

Posted in News | Tagged , , , , , | Comments Off on Fighter jet crashes into trees at Monarto, South Australia

Jet Action 2007, AMA Field, Monarto, South Australia

Jet Action 2007

26 May 2007 at the Adelaide Model Aerosport Field, Monarto, South Australia

My first visit to Jet Action was no disappointment. With great weather, clear skies, slight wind from the north and a top temp of about 21 Celsius the day was of to a great start. A few friends also turned out along with my brother and my son.

The action started very soon after we got there at 10AM with the first and only crash of the day. F-18 Hornet suffered a problem with the radio gear resulting in the engine shutting down just over the field leaving the pilot struggling to wipe of speed and get the plane down as quickly as possible. Anyway, you can see the video here:

It wasn’t to long after that we had Peter Agnew’s Navy Panther jet on the runway and doing some circuits of the field. These things are expensive. At some $20,000 plus 300 hours of labour, it’s not something that you crash. Anyway, for your enjoyment you can see it in action.

This pilot/plane was probably the highlight of the day. A jet doing things that I have never imagined a jet can do, like stand on end still in mid air and hold it there. I’ve seen this done with other aircraft but as soon as they stall at the top of the climb, they fall over and head back to earth. You just need to take a look. I think you will be amazed.

This next video is a very well built aircraft. It’s an F16 that looks so much like the real thing you won’t notice it’s not until something puts it’s size into perspective. Have a look.

Don’t forget to check out the pics in the Gallery.

It’s also worth having a look at the Adelaide Model Aerosport site and their Jet Action 2007 section in their picture gallery

Posted in Model aircraft, YouTube finds | Tagged , , , , , , , , , , , | Comments Off on Jet Action 2007, AMA Field, Monarto, South Australia

The new way of TV

As bandwidth is increasing on the internet, it’s changing the way normal people all over the world watch “TV”. No longer are you controlled what you can watch or when you can watch it. Now you pick your content and when you watch it. Not only is this change significant for viewers, it also opens up doors for the avergage joe to start creating content.

This video here is one that I found through Kaitlin Hill (TheHill88) where Tom Green has set up a home studio in his lounge room and boadcasts a regular show over the internet. He has guests that traditionally would only be seen on “normal” television. This episode has Weired al Yankovic and pro skater, Mike Vallely. Their also on line with Don Sibly via the Internet from Sydney where Don’s grabbed his laptop and a crew and gone onto the streets of Sydney to do some comedy and some interviews.

Posted in YouTube finds | Tagged , , , , , , , , | Comments Off on The new way of TV

Changing the Rotor Blades on a Twister CP V2 Hellicopter

Over a period, especially when learning to fly, you find you need to change
the rotor blades on your Twister CP V2 Helicopter. This article describes the process of
removing the current ones and installing the new ones.

    • Clear work environment of at least 80cm wide by 60cm deep.
    • 1.5mm Alan Key

Step 1 – Removal of blades.

Using the Alan Key, unscrew the screw (036) holding the Main Blade (042) to the Main Blade Clamp (037) ensuring you keep your finger over the nut (xxx) on the underside of the Main Blade (042) to prevent it dropping out and getting lost. Once you have unscrewed the screw (036), remove it and carefully slide the Main Blade (042) out of the Main Blade Clamp (037). With the Main Blade (042) out, you can concentrate on getting the nut (xxx) and storing it safely.

View of nut under rotor bracket

Make sure you don’t loose the nut under the bracket – click to see larger

Changing the rotor - remove old

Unscrew the screw ensuring you don’t loose the nut on the bottom of the blade clamp. (click on image for full size)

Repeat this for the other blade if required

Step 2 – Inspect

Check the new Main Blades (042) don’t have cracks or scratches especially on the leading edge and around the mounting area.

Check the Main Blade Clamp (037) to make sure it moves freely and does not show any signs of cracking or un-due wear and tear.

(Remember: The blades on you Twister CP V2 Helicopter have considerable stresses applied to them and they have the potential of doing considerable harm and damage.)

Step 3 – Install new blades

Fit the Main Blade (042) with the leading edge of the blade on the clockwise side when looking from the top into the Main Blade Clamp (042) lining up the hole for the screw (036).

Install new blade

Install new blade with leading edge lead when rotating clockwise

Insert the screw (036) into the hole and using the Alan key give it a half turn to get the thread bitting. Then insert the nut (xxx) into the cavity on the bottom of the Main Blade Clamp (037). Now continue to tighten the screw (036) with the Alan Key until firm.

Changing the rotor

Use the screw and nut removed in step 1 to secure the Main Blade to the Main Blade Clamp. (click on image for full size)

Line the Main Blades (042) up straight and at right angles to the Fly Bar (003). Tighten the screws (037) and nuts (xxx) firmly so the Main Blades (042) will just move.

With the first flight following fitting, bring the throttle up slowly monitoring the blades.

The following is the assembly schematic out of the Twister CP V2 Bell/Hiller Carbon Rotor version. Click on the thumbnail to see full size.

Twister CP V2 Helicopter assembly schematic

Twister CP V2 Helicopter assembly schematic (click image to see full size)

 

Posted in Model aircraft | Comments Off on Changing the Rotor Blades on a Twister CP V2 Hellicopter

Want to know more about those RC Jet Powered model aircraft?

F16 Model plane kit

F16 Model plane kit

With either a JetCat or a Wren turbine which operate on Jet A1 fuel exactly the same as the real jet turbine engines found in that Qantas jet that lands at Adelaide airport, these model aircraft are an incredible piece of engineering. When you hear them before seeing them, you’ll swear your hearing a real jet engine.

Jet turbine driven model helicopters

Jet turbine driven model helicopters

How fast?

I don’t really know yet. The US FAA has placed a speed limit on these models of 377kmh (234mph) however these pilots report faster speeds than that. To put a little perspective around this, a Cessna 174 (typical single engine 4 seater) has a top speed of 320kph (200mph) at sea level.

The helicopters seem to get speeds up to about 140km/h, a little slower than their real life counterparts but not much.

Fuel
These engines use the same fuel as their the full size versions, Jet A1, 1-K kerosene. So when you are around these planes, you’d swear your at the airport. Fuel consumption varies but as an example, the JetCat P160 uses 454 grams (16 oz) per min at full power.

How the engine works
They really work the same as the full size engines with the main difference being the size of the parts used. They have a compressor, combustion chamber, turbine and exhaust nozzle. Air enters the engine and is compressed by the compressor. The compressed air is moved through the combustion chamber where the air is heated, making it expand (and compress even more). This air moves through the turbines at very high speed which makes them spin. A shaft is connected to the turbines and back through the front of the engine which connects to the compressor blades turning them. The air from the turbine stage exits the engine through the exhaust nozzle at very high speed (about 2,000km/h or 1,300mph) which pushes the engine and plane through the air.

With the helicopter, there is a second shaft connected to the turbines which goes through a gearbox to drive the helicopters rotor. In this version the air coming out of the turbines is exhausted and not used for thrust.

Two good articles that explain this with illustrations is:

Some of the engines and power plants

Jetcat-p160

JetCat P160 Jet Turbine engine

Helicopter powerplant using a JetCat Turbine engine.

Helicopter powerplant using a JetCat Turbine engine.

Alternative helicopter power plant using a JetCat Turbine engine

Alternative helicopter power plant using a JetCat Turbine engine

How much?

If your anything like me, I have to know what would a hobby like this cost me? Well here’s what I found out so far. Please note, I don’t sell these and the prices here are what I found the things for on the Internet at the time of writing.

Engines:
Prices range from AU$3,400 for a JetCat P80 to AU$7,600 for the JetCat P200. For helicopters, you would spend about AU$7,300 for a SPH5 Helicopter Power Unit.

Plane:
I’ve found kits start at about AU$1,200 for a Boomerang Intro ARF Jet Kit and work up from there. The sky really is the limit as some of the planes are really impressive with enormous amounts of time going into their construction.

Controllers, computers etc:
You need to be able to control these models and they don’t come with a controller. Most hobbyists have a tendency to like a particular controller so its left up to the individual. Priced that I found started from about AU$199 for a simple 4 channel radio kit to AU$3,350 for a Futaba 14CH Radio Control System.

So for a full kit, one should expect to start at about AU$6,000 when you get the other bits that are not included, with most hobbyists spending much more.

A tip:

If you don’t have experience in flying these models, start small and cheap. When they crash, there is usually nothing left.

The next two pictures are of a B52 Remote Control model aircraft which was flown by someone with experience. You can see the results anyway.

Remote control B-52 aircraft before takeoff

Remote control B-52 aircraft before takeoff

Remote control B-52 aircraft crash site

Remote control B-52 aircraft crash site

Comment from a YouTube viewer explains a little what happened:
pete2778 (6 March 2007) I was there and saw this happen, RAF Barkston Heath, Lincolnshire, England, August Bank Holiday Weekend in 2005. It was the BMFA national championships. It was blustery but many other models were being succesfully flown. The problem was that the roll spoilers on the B52 become very ineffective past a certain angle of roll, a gust pushed it beyond that angle and the rest was history. Sure looked realistic, most realistic model crash I’ve ever seen!

Where can you buy (in Australia)?
This is not exhaustive, it’s what I found in a short time of looking. If your a dealer, and want to be listed here, feel free to drop me an email 

Dealer City/State  Web Address 
ModelFlight Forestville, South Australia http://www.modelflight.com.au/
Intairco Hurstbridge Victoria http://www.intairco.net/

Clubs in Australia that fly jet powered aircraft:

Club City/State
Web Address
Posted in Model aircraft | Tagged , , , , , , | Comments Off on Want to know more about those RC Jet Powered model aircraft?

DNS and what to watch for

Trev’s suggestions on the best way to manage your domain name

Domain names are a vital part of your hosting and mail system and is often forgotten as it’s the part that sits in the background quietly working until one day it does not. This is meant as a plain english guide to help would be web masters understand how to set up the management of their domain name to reduce the impact of outages on the internet.

First, what is DNS

DNS stands for Domain Name Service.

Human’s like to use names. A name has a meaning. The internet can’t use names, it needs numbers. So we have an issue.

DNS is the translator between the human name and the internet number. So my web site here is called “trev.id.au”. That’s what you type in your browser to get here. Your web browser asks the DNS for trev.id.au internet number address. The DNS returns the number (in this case 61.14.187.198). The browser now can ask the networking system of your computer to go fetch the page for the address that the Internet can work with.

Email works in a similar manner. You address an email to user@domain.com.au. The email program first asks the DNS where it should send mail for domain.com.au and what is the number address or IP address. It then tries the address and if it works, it sends the mail.

The key problem with incorrectly managed domains.

The real problem is around email. If an email server cannot resolve your domain name because the DNS is down, it will return the email to the sender with an error that makes it look like you don’t exist. If it’s just a hobby system, not so bad, but if it’s your business, it can be severely damaging.

What needs to happen

You should have at least two physical servers in different parts of the internet doing the resolution of your domain name (the translating between name and number and the telling where to send mail). It’s also a good idea for these servers to be different from your domain name registrar and your hosting provider. I have used both http://www.zoneedit.com and http://www.dyndns.org.

So with two seperate servers capable of answering DNS queries for your domain and email, and these in two different physical locations, both have to be down for your domain to be down. Chances, well I’ve been hosting this way for about 7 years now. My site goes down because my server does, but my domain has never and mail always works.

You can host the domain name at zoneedit for free on 2 servers (as per their site at time of writing this)

Email when your server is down

Servers go down. That’s life. What happens to email if your server is down? If the domain name resolves, the sending mail server will generally hold and keep trying for a short while. This overcomes the occasional network outages. For longer periods, the sending mail server bounces the mail back to the sender.

This can be overcome by using a mail forwarder which is a server on the internet that is defined as being the second server if the primary server is not available. It holds a lower priority than your main mail server. This allows your server to go down with no impact to mail from the outside world.

I use this service and have been happy to pay the small amount it costs me each year.

Summary

Separate functions to provide resilience.

1. Register the domain name with a domain registration authority. Seehttp://www.auda.org.au/registrars/accredited-registrars/ for a list. I’d recomend using a AUDA accredited organisation.

2. Register with a DNS hosting organisation like www.zoneedit.com or www.dyndns.org and set up your domain name. Note this is not registering the name, but it’s getting it ready. You will be given some info from the DNS hosting company in the form of a name and ip address for each of the two servers that are going to host your domain name.

3. With the server information, go back to the registrar and manage your account/domain. Find where to enter the domain name server information and change it to the names and ip addresses provided in step 2.

4. Now sign up with a hosting company. The hosting company will give you an IP address to use for your domain name. You should use the manage interface of the DNS hosting organisation to configure the name and number for domain.com, www.domain.com and optionally, but usually good, mail.domain.com. These 3 names should all point to the IP address provided by the web hosting company in step 3.

Detailed configuration example
[This is under construction]

There are many providers of these services. I’m going to provide the detail around setting this up using www.enetica.com.au as the Domain Name registrar, www.zoneedit.com as the DNS hosting organisation and www.mdwebhosting.com.au as the web and mail hosting company.

Posted in Computers and networking, Web hosting | Tagged , , , , , , | Comments Off on DNS and what to watch for

Jet propelled radio controlled model aircraft – What a hobby

Flying session at a club - click image to see video

Flying session at a club - click image to see video

After finding the first video of a model jet propelled aircraft, I had to investigate further. There is quite a number of communities around the world that get into this hobby. The next four pictures are links to a 6 1/2 min video clip I found on Google Video showing what looks like an airfield with a number of these jet propelled model aircraft.

Flying session at a club - click image to see video

Flying session at a club - click image to see video

The planes have a push button start engine and run on kerosene like the real thing. The US FAA won’t allow them to fly faster than 377km/h (234mph) but it’s believed they will do considerably quicker.

A rough estimate is US$12,000 for an flying aircraft. Not bad for something that looks, smells and sounds like the real thing.

Landing is not all that easy. The nature of these jet engines is even at idle, they generate considerable thrust. So slowing to a good landing speed requires a level of skill. Probably a good idea to buy a cheap prop plane first to get used to it. At least crashing that won’t cost you a cool 12G’s.

Some flying action - click image to see video

Some flying action - click image to see video

Not all things go as planned though as seen in the video. Just click any of the four pictures above to link directly to the video on Google Video.

Not all things always go as planned

Not all things always go as planned

If your interested, here are a few links of interest on these types of engines

Jet Engines – Glue-it.com

http://www.glue-it.com/aircraft/general-information/glossary/j/jet_engines.htm

gas turbine engine

A gas turbine engine

Small extract from page:

Although practical model jet engines have been around since the early 1980’s it has only been in the past few years that home construction has become viable. Careful design has made simple home construction possible using basic tools and a small centre lathe.

Jet Engines – Cermark

Cermark logo
http://www.cermark.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=C&Product_Code=JetCat-P160

Jetcat-p160

Jetcat-p160 Turbine engine from Cermark

Small extract from page:
Aprox Price: AU$5,200 (US$3,995) (as at 10Nov06)
Weight: 1.52KG (3.34 LB)
Diameter: 11.2 cm (4.4 inches)
RPM Range: 32,000 – 128,000 RPM
Exhaust gas temp.: 650°C-770°C
Fuel consumption: 454 grams (16 oz) per min at full power
Fuel: Jet A1, 1-K kerosene

Posted in Model aircraft | Tagged , , , , , , , , , , , , | Comments Off on Jet propelled radio controlled model aircraft – What a hobby

Laughter, how good is it? Well check this out…

Ever wonder how good is laughter? Or how healthy we would be if we good really laugh? Especially one of those laughs from deep down in our belly? Well this kid must be incredibly healthy. Just have a listen to that deep belly laugh.

baby laughing - click image to see video

baby laughing - click image to see video

If he’s not healthy, he certainly is popular. Just check the stat’s on YouTube

Posted in YouTube finds | Tagged , , , | Comments Off on Laughter, how good is it? Well check this out…

Faith Hill didn’t win and she’s pissed

24 hours on YouTube and it’s had 1.5 million views, 1,250 comments and 760 people added it to thier favourites. What is it? Well it’s Faith Hill showing her true colours when she doesn’t win the award for Female Vocalist of the Year.

A pissed Faith Hill - Click on image to see video

A pissed Faith Hill - Click on image to see video

Some of the comments include:
She grew an ego. that is her problem (elegantblue)
She wan’t yelling “what” you idiots. I’m a skilled lip reader. She was actually yelling, “I’m a no talent [*****] whose songs all sound the same.” (CountryShaft)
The Paris Hilton of country music got caught. ROTFL (luxetveritas27)

Posted in YouTube finds | Tagged , , , , | Comments Off on Faith Hill didn’t win and she’s pissed